X-Tra Seal Archives - Devon Tile Doctor

Victorian Tiled Hallway Floor Restoration Exeter Hotel

Full Victorian Hallway Floor Restoration at Exeter Hotel

I received an inquiry from a client who was in the middle of converting and restoring an old manor house in Exeter, Devon and was keen to understand if her original Minton tiled floor could be salvaged and restored to a similar high standard which met that of the rest of the project.

The owners purchased this period property because of its characterful charm and original features, therefore if it was possible, they wanted to save the floor.

Victorian Tiled Hallway Floor Before Restoration Exeter Hotel

After booking in a survey, I arrived at the property and spoke with one of the owners and the site foreman. It was clear that when this property was in use as a hotel the hallway was utilised for the reception and desks and furniture had taken a real toll on a lot of the individual tiles, many of which were badly chipped, cracked, and damaged.

After inspecting the Victorian floor, I worked out a restoration plan and confirmed I could source matching replacement tiles. This enabled me to create an accurate price for the work which was agreed and I booked in a two-week slot with the owners to carry out the work.

Repairing and Deep Cleaning a Victorian Tiled Hallway Floor

I began the restoration by cutting out all the damaged and broken tiles which would need to be replaced, there were approximately 75 tiles that needed removing. After this I hand cut each coloured shaped tile by templating the originals and dry fitted before installing with adhesive.

Victorian Tiled Hallway Floor During Restoration Exeter Hotel

After all the tiles had been cut, fitted, grouted, and set it was time to move on to cleaning with the aim of restoring the appearance of the whole floor to its original state. I did this by using Tile Doctor’s soft milling pads 100-grit through to 800-grit lubricated with Tile Doctor Remove & Go to help clean and remove any remaining sealer from the floor. The floor is rinsed after each pad and the resultant slurry extracted with a wet vacuum.

The next step was to give the floor an acid rinse using Tile Doctor Grout Clean-up which further cleans the tiles by removing grout haze and other contaminates. Being an acidic product, it has the added benefit of neutralising the pH level of the floor after the use of the alkaline Remove and Go earlier, it also microscopically etches the tile to improve the bond with the sealer which will be added later.

Sealing a Victorian Tiled Hallway Floor

At this point I left the floor to dry for a few days before returning to seal the floor using Tile Doctor’s X-Tra Seal which is a colour intensifying and breathable sealer. I applied two coats, allowing each one to dry before applying the next.

Once the sealer had dried, I buffed the floor with a White pad to remove any excess sealer and then ran a 1500-grit burnishing pad over the tiles which added a complimentary natural satin sheen to the tile faces throughout.

Victorian Tiled Hallway Floor After Restoration Exeter Hotel

The hallway looked great, what a transformation, it really complemented the lovely ornate staircase and created a very welcoming entrance to the property. My clients were very satisfied that we had been able to complete such a good restoration and had brought the place back to life enhancing the period features as they had wanted.

Since completion of the job, this restoration has featured in the well-known ‘The Escape To The Chateau’ fan club page on Facebook.

Professional Restoration of a Victorian Tiled Hallway in Devon

Full Victorian Hallway Floor Restoration at Exeter Hotel Read More »

Encaustic Shower Room Floor Tile Cleaning Honiton

Renovating Discoloured Encaustic Floor Tiles in a Honiton Hotel Bathroom

This enquiry came from a prestigious hotel outside Honiton (North of Sidmouth), they were concerned about the appearance of the Black and White floor tiles in one of their luxury bathrooms.

I visited the hotel to survey the floor tiles and could see the tiles were Encaustic and heavily soiled as described. Unlike Ceramic tiles encaustic’s need to be sealed to prevent the build-up of dirt becoming ingrained in the tile. In this case the sealer had worn off with wear and probably the use of strong cleaning products, without the sealer in place the tiles had become discoloured.

Encaustic Shower Room Floor Tiles Before Cleaning Honiton

I knew the problem could be resolved and so informed the manager there would be no need to pull the floor up and replace just before the season was about to start. She was very relieved to hear this and pleased that we could resolve the problem relatively easily and quickly.

Deep Cleaning Encaustic Floor Tiles

To restore the appearance of the encaustic tiles I applied a set of Tile Doctor’s Diamond encrusted Burnishing Pads. Starting with the 400-grit pad fitted to a weighted rotary machine I cut the surface of the tile down whilst lubricating with water during the process. Just enough is removed to get past the staining allowing the original, uniform colours to come back up.

Rinsing and extracting with the wet vacuum after each pad I moved through the series of pads onto the 800 and 1500-grit pads again using water to lubricate. It was then time for a light clean using a dilution of Tile Doctor Pro-Clean to lift out all the remaining slurry and dirt in and around the tiles and joints.

I then put several fan’s on to assist the floor drying before using a spray burnish technique to finish the floor. This is where a small amount of water is sprayed onto the tiles and then a very fine 3000-grit polishing diamond pad fitted to a rotary machine is run over the floor. This process helps reinstate a good level of sheen to the tiles.

Sealing an Encaustic Tiled Shower Room Floor

The following day I returned to seal the tiles first checking the floor had completely dried out. To do this I take several moisture readings using a damp meter. The readings were fine so I was satisfied the tiles were ready to accept a sealer.

To seal Encaustic tiles, I selected Tile Doctors robust colour enhancing sealer called Tile Doctor X-Tra Seal. This will be particularly good for high traffic use and will stand up to the wear and tear in a hotel bathroom.

Encaustic Shower Room Floor Tiles After Cleaning Honiton

The hotel manager was extremely happy with the results and even more so with the fact the hotel doesn’t need to replace the floor at large cost and has insisted she book me back in periodically to work through the other bathrooms/shower-rooms which are all also tiled with encaustic tiles. I also took time to advise the use of Neutral Tile cleaner for the regular cleaning of the encaustic floor tiles, it’s an effective but mild tile cleaner that’s safe to use on sealed tiles.

As much of our business comes from recommendations and repeat clients, this type of work is invaluable to us, we were delighted we could help, now they are ready for the busy holiday season.

Professional Restoration of Encaustic Floor Tiles in Devon

Renovating Discoloured Encaustic Floor Tiles in a Honiton Hotel Bathroom Read More »

Quarry Tiled Lobby Before After Renovation Kenton Devon

Deep Cleaning and Sealing a Grubby Quarry Tiled Lobby in Kenton, Devon

1 Comment / Exeter Tile Cleaning Service, Quarry Tile Cleaning / Harry Payne

This client called us out to look at their grubby Quarry tiled lobby at the front of their property in Kenton near Exeter. Being the main entrance to the property it saw a lot of foot traffic so once the sealer had worn down it wasn’t long before the dirt started penetrating the pores of the tile and became difficult to keep clean.

Quarry Tiled Lobby Kenton Before Renovation

The property was originally a school and dated back over 200 years. The Quarry tiles in the entrance lobby were probably as old as the building and as mentioned earlier were looking worse for wear having been partially covered for years. They weren’t sure how old the tiled floor was, but they were keen to see it restored. They were therefore desperate to get the floor deep cleaned and a fresh seal applied. They agreed to my quotation, and we arranged a convenient date to carry out the work.

Cleaning a Quarry Tiled Hallway Floor

I started by taping up the skirting to protect it from the cleaning products we would be using. I then applied Tile Doctor Remove & Go to the floor and covered the area with plastic sheets to stop the evaporation of the products so that I could achieve a longer dwell time. This would really get to the deep-seated dirt and loosen it so it can be lifted from the pores of the tiles.

I then worked the floor with 200-grit carbide brush fitted to a rotary machine to remove the dirt ingrained in the clay pores of the tile. Some of the grout was loose and dislodged in the process, however my client was expecting this and had already arranged for his tiler to complete a full re-grout once we had finished cleaning. The soiling released by the cleaning process was rinsed off the floor with water and extracted with a wet vacuum.

Sealing a Quarry Tiled Lobby Floor

I wanted to seal the floor the next day so I left a couple of driers in place overnight to speed up the drying process. The next morning when I returned, I first checked the floor to make sure it was dry with a moisture meter.

The dryers had worked their magic so I was able to begin sealing the floor with Tile Doctor X-Tra Seal which is an effective interior and exterior sealer. With the lobby being a high traffic area, I applied four coats to ensure a durable seal. The benefit of this sealer is it gave the floor a nice sheen really bringing out the depth of colour in the tiles, and with the newly applied grout the floor looked great.

Quarry Tiled Lobby Kenton After Renovation

For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner. This is a pH neutral product which is gentle enough for daily use. It won’t compromise the newly applied sealer which can be a problem with the stronger bleach-based products you find in supermarket products.

The work completely transformed the Quarry tiles and my client was very happy with the completed job and told me they wished they had tackled it sooner.

Professional Restoration of a Quarry Tiled Lobby in Devon

Deep Cleaning and Sealing a Grubby Quarry Tiled Lobby in Kenton, Devon Read More »

Victorian Tiled Hallway Floor Renovated Exmouth

Victorian Tiled Hallway Renovated Ready for House Sale in Exmouth

1 Comment / Exmouth Tile Cleaning, Victorian Tile Cleaning / Harry Payne

This owners of this grand Victorian property in Exmouth were putting their home on the market and so decided to have its beautiful patterned Victorian Tiled hallway floor renovated to its former glory first.

Victorian Tiled Hallway Exmouth Before Cleaning

To get the best price for your property it needs looking its best and first impressions count so it makes sense to ensure the frontage and the hallway looks its best.

Deep Cleaning a Victorian Tiled Hallway Floor

I began by applying Tile Doctor Remove & Go to the floor which was then left to soak in for twenty minutes. This gives the product time to breakdown and emulsify existing sealers and loosen ingrained dirt. I then worked the floor with a 200-grit burnishing pad fitted to a rotary machine which had extra weights fitted to improve contact. The pads are made with industrial Diamonds that cut into and release the dirt bringing it to the surface where it can be removed. To help with lubrication the floor was wetted with minimal amounts of water, old floors like this one will not have had a damp proof membrane installed so it’s best to keep fluids at a minimum.

The now soiled cleaning solution was extracted with a wet vacuum and I hand cleaned around the perimeter with Diamond burnishing blocks. A few rinses were required to remove the now dirty cleaning solution from the floor, again keeping water to a minimum and extracting with the wet vacuum afterwards. The Victorian tile and grout were then left to dry off overnight with the assistance from a couple for floor dryer’s that I left in place overnight.

The following day I went back over the floor with the Diamond handheld burnishing blocks focusing on anything I may have missed the day before such as paints spots from decorating and other stains. Once satisfied I gave the whole floor an acid wash using Tile Doctor Grout Clean-Up worked in with a 400-grit burnishing pad. We do this to prepare the tiles for sealing and neutralises any leftover alkaline cleaning product left in the pores of the tile. This process also removes old grout smears and will counter any latent efflorescent salts in the tiles. Once done, the floor was rinsed, extracted, and left to dry off overnight as before.

Victorian Tiled Hallway Exmouth After Cleaning Sealing

Sealing a Victorian Tiled Hallway Floor

it’s probably difficult to tell how dirty the tiles were from the earlier photographs but by the time I returned on day 3 the customers were already chuffed with how much cleaner the floor was looking.

Moisture readings taken from the floor indicated it was dry enough to seal so I set about applying a base coat of a colour enhancing sealer called Tile Doctor Colour Grow. There was 36m2 of tiling through the hallway section and into the more heavily used entrance way so it took some time to apply. One that was dry I then applied a topcoat of Tile Doctor X-Tra seal to add further protection.

Victorian Tiled Hallway Exmouth After Cleaning

The new sealer will protect against dirt from muddy wellies, boots, and pets, keeping the dirt on the surface where it can easily be removed using an everyday cleaning product like Tile Doctor Neutral Cleaner.

Professional Renovation of a Victorian Tiled Hallway in Devon

Victorian Tiled Hallway Renovated Ready for House Sale in Exmouth Read More »

Victorian Tiled Hallway Floor Renovation Exeter

Victorian Tiled Hallway Restoration Exeter, Devon

1 Comment / Exeter Tile Cleaning Service, Victorian Tile Cleaning / Harry Payne

A couple in Exeter were nearing the end of an extensive house renovation and called me in to see what could be done to revive their Victorian tiled hallway. The previous workmen had managed to tread all sorts of building materials into the tiles, however I assured them all was not lost and that it would certainly be possible to put the life back into the floor and turn it into an eye-catching original hallmark feature once more.

After the initial free home survey, I issued them with a quote which they were happy with and they booked me straight in to complete the renovation. If your having work done to your property, I would agree it makes sense to renovate the flooring last but it will help if you protect the flooring as well.

Cleaning/Repairing a Victorian Tiled Hallway Floor

I started the process by taping and protecting around their freshly decorated areas and custom fitted radiators. Tile Doctor Product Remove & Go was then diluted and applied to the floor and allowed to sit and dwell for a good 20 minutes. I then introduced my rotary machine with a 200-grit diamond pad to work off the stubborn surface debris, the left-over paint and cement stains. I repeated the process in some areas where the staining was particularly bad. The floor was rinsed each time and the waste was extracted with a wet vacuum.

Victorian Tiled Hallway During Renovation Exeter

A good deal of hand-block work was required around the perimeters where messy decorators had left their mark in the past. With the tile pores still open after the 200-grit pad I applied a Tile Doctor Acid Gel wash to the floor and let the product sit for half an hour before removing with the vacuum and taking any remaining excess product off with a damp cloth.

The next day I installed a course of tiles at the top end which they wanted fitting to tie in level with their freshly poured polished concrete kitchen floor. I had to build up a substrate first on top of the damp proof membrane already in place before cutting and fitting the tiles and grouting. Using quick set adhesive and grout meant these were soon dry, but they were still left overnight to set ahead of the final step of applying the sealer.

Sealing a Victorian Tiled Hallway Floor

Returning on the final day, the first job was to test that the floor was dry using a damp meter. Once satisfied the day was spent applying two coats of Tile Doctor X-Tra Seal which reinstated the vibrant colours and put the life back into the original Victorian Tiles. This is a modern breathable sealer which is oil based. It provides great protection from water and staining whilst leaving a nice subtle sheen.

Victorian Tiled Hallway After Renovation Exeter

The clients were over the moon with the job and thanked me for bringing back to life this lovely feature of their period home. It was important for them to keep the balance between new and old in this modern renovation on their Victorian home. The hallway was now a lovely welcoming area.

For aftercare cleaning of sealed Victorian tiles, I recommend using Tile Doctor Neutral Cleaner. It’s a mild tile and grout cleaning product that won’t prematurely erode the lift of the sealer, many supermarket brands are simply too strong for use on sealed tiles.

Professional Restoration of a Victorian Tiled Hallway in Devon

Victorian Tiled Hallway Restoration Exeter, Devon Read More »

Slate Flagstone Floor Renovated in Bideford

Rescuing a 200-Year-Old 45m2 Slate Flagstone Floor in Bideford, Devon

1 Comment / Bideford Tile Cleaning, Slate Tile Cleaning / Harry Payne

Whilst surveying this 200+ year old floor at a cottage in Bideford the owners told me that they were quite set on pulling up their original Slate flagstone floor and replacing with new stone, but they wanted to make sure they had explored every option before making that decision.

Slate Flagstone Floor Before Restoration Bideford

The floor, which is around 45m2, had previously been covered in old underlay and carpet for some time. There were damp issues, some relatively significant shale in areas where the moisture had sat and enough paint stains on the floor to give the walls another coat 😊

I reassured them that the floor had plenty of life left and could be rescued, and once done it would be a real feature of the property that matched its age. Removing and replacing at huge cost would not be necessary. They accepted my quote and we set a date for the work to start.

Resurfacing and Cleaning a 200-Year-Old Slate Flagstone Floor

Day 1 started with resurfacing the old Slate flags using a coarse 50-grit diamond pads which was fitted to a weighted rotary floor machine. These pads cut back the old, tired surface of the stone and reveal a new untainted surface removing the shaling stone and paint marks stains,

This process also opens the pores in the stone allow the long-standing moisture to finally evaporate overnight. Although the machine does most of the hard work its meticulous work and requires rinsing and extracting to remove the soiling.

It’s slow meticulous work and once the whole floor had been completed, I moved on to a 100-grit and then a 200-grit pad to slowly close the pores in the stone and restore the appearance of the Slate.

To fully restore the appearance of the Slate I then applied a finer 400-grit diamond burnishing pad which removed the remaining scratches and swirl marks. At the end of day 3 I knocked out a few troublesome joints and re-pointed these areas with a German Resin based jointing mortar called VDW800.

Sealing Old Slate Flagstones

By day 5 the Slate floor was ready to be sealed for which I applied two coats of Tile Doctor X-Tra Seal which is a premium oil-based product that works well on old stone floors like this one.

The natural stone colours and mineral patterns soon began to pop out again leaving a stunning and freshly restored Slate flagstone floor. The owners were over the moon with the results. They had not only saved the largest internal original feature in the cottage but had also saved money as well. A great result.

Slate Flagstone Floor After Restoration Bideford

For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner which is a mild pH neutral tile cleaning product that will ensure the integrity of the newly applied seal and will keep the floor looking in this great condition for years to come.

Professional Restoration of a Slate Flagstone Tiled Ground Floor in Devon

Rescuing a 200-Year-Old 45m2 Slate Flagstone Floor in Bideford, Devon Read More »

Damaged Limestone Hallway Patio Fully Restored in Exminister

Renovating a New Limestone Patio Damaged by Brick Acid in Exminster

1 Comment / Exeter Tile Cleaning Service, Exmouth Tile Cleaning, Limestone Tile Cleaning and Polishing / Harry Payne

I was contacted by a very unhappy customer from the village of Exminster who had recently had a new Limestone Patio laid in the Garden of their house in near Exeter. After the builders had finished laying the patio, they must have used some sort of brick acid to clean the stone and remove excess mortar. With limestone being Acid Sensitive, it etched the stone leaving it in a mess. Also, you need to consider the effects of acid rain so leaving an acid sensitive stone un-protected in the UK is a big no no and will result in its degradation over time.

Acid Damaged Limestone Patio Before Renovation Exminster

Exminster is a village on the southern edge of the City of Exeter, and I often find myself working there, so it was no problem to pop down and visit the property to investigate the problem fully.

Whilst at the property and discussing the Patio with the owner I carried out a couple of tests using various products. The testing went well, and my customer could immediately see the potential of the Patio and how the problems could be rectified. The process I had worked out would involve treating the damaged white areas using a series of Tile Doctor Diamond pads to polish out the damage and then restore the colour and protect the Limestone with Tile Doctor X-Tra seal which is an ideal sealer for external stone. Happy to accept our quote a suitable weather window was chosen, and the date was set for the work to be done.

Renovating an Acid Damaged Limestone Patio

I started by adding weight to a Viper rotary floor buffer and then ran over each slab several times with a very coarse a 100-grit milling pad using water for lubrication. The process was repeated using a finer 200-grit milling pad and then a 400-grit burnishing pad again with water to lubricate the process. After each pad the patio was rinsed with water running at high-pressure using a cleaning and extraction system that is fitted into our van.

After the stones had been renovated, I gave them a full deep clean to remove any remaining dirt and staining using Tile Doctor Remove and Go which was worked into the Limestone with a black scrubbing pad. After a final rinse and extract with the van mounted cleaning system I left the Limestone patio to dry out overnight.

Sealing a Limestone Tiled Patio

With the weather still in our favour I returned the next day to seal and protect the patio with two coats of Tile Doctor X-Tra seal. This is a truly remarkable product which is fully breathable and can be used both internally and externally. It’s an oil-based sealer so its puts back the essential oils that have been leached out of the stone by the use of brick acid, thereby restoring colour and structure to the stone.

Acid Damaged Limestone After Before Renovation Exminster

My customer was very happy with the transformation and with the summer just around the corner can now enjoy their freshly laid Limestone patio in all its glory. More importantly it is now sealed and protected against future elements.

PS… For aftercare of an acid sensitive and sealed patio like this one you need to be careful what you clean it with. In this case I recommend Tile Doctor Neutral Cleaner which has a neutral pH that won’t damage the stone or the sealer. Many of the cleaning products you will find in supermarkets etc. are simply too strong and will weaken the sealer over time.

Professional Restoration of a Damaged Limestone Flagstone Floor in Devon

Renovating a New Limestone Patio Damaged by Brick Acid in Exminster Read More »